Construction supplies backed by engineering
Steel arches, ground stabilization and reinforcement components, fibers, piles and cut-and-bent rebar, specified for each project and reviewed by our technical team before reaching the site.
Materials backed by engineering judgment
We don’t just sell steel: every order goes through a technical review by our geotechnical and tunneling team. We verify that the section, steel grade and cutting schedule are consistent with the typical section, the ground class and the project drawings, and we support receipt and installation on site.
- 01Selection of section and steel grade according to ground class and design loads
- 02Review of drawings, radii, cutting schedules and connections before fabrication
- 03Advice on installation, quality control and receipt on site
- 04Logistics coordination from the plant to the work front
- STEP 01
Requirement
Send us the project drawings, typical section, quantities and specifications.
- STEP 02
Technical review
We validate section, steel grade, geometry and cutting schedule with geotechnical judgment.
- STEP 03
Quotation and fabrication
Price, lead time and plant fabrication with ISO 9001-certified manufacturing.
- STEP 04
Delivery and support
Shipment to site, support during installation and material receipt.
Supply to order, manufactured or selected to each project’s specification, with partner manufacturers and suppliers (ISO 9001-certified manufacturing of arches and steel components). Prices, lead times and availability are confirmed in each quotation.
Steel arches for tunnels
Support arches in TH and HEB sections for road and hydraulic tunnels and mine drifts, in standard geometries or tailored to the project’s typical section.

- NATM tunnels · underground mining
TH 21 · TH 25 · TH 29 arches
Channel-shaped sliding (yielding) section for yielding support, in 20MnK and 31Mn4 steels. Suitable for ground with significant deformation.
Request a quote - Road tunnels · portals · transitions
HEB 100 to HEB 180 arches
Rigid steel sets in H section, in ASTM A36, A572 Gr 50, A529 Gr 50, S275JR and S355 grades.
Request a quote - Special sections · portals
Custom arches
Bending and fabrication to the project’s radius, typical section and cutting schedule, including portal canopies and special sections.
Request a quote
| Section | B (mm) | H (mm) | Mass (kg/m) | Area (cm²) | Ix (cm⁴) | Wx (cm³) |
|---|---|---|---|---|---|---|
| TH 21 | 127 | 108 | 20.9 | 26.7 | 324 | 60 |
| TH 25 | 136 | 118 | 25 | 31.9 | 455 | 74 |
| TH 29 | 150 | 124 | 29 | 37 | 598 | 93.7 |
20MnK steel: yield strength ≥ 390 MPa · tensile strength ≥ 570 MPa. 31Mn4 steel: yield strength ≥ 350 MPa · tensile strength ≥ 550 MPa.
| Section | h (mm) | b (mm) | tw (mm) | tf (mm) | Area (cm²) | Mass (kg/m) |
|---|---|---|---|---|---|---|
| HEB 100 | 100 | 100 | 6 | 10 | 26 | 20.4 |
| HEB 120 | 120 | 120 | 6.5 | 11 | 34 | 26.7 |
| HEB 140 | 140 | 140 | 7 | 12 | 43 | 33.7 |
| HEB 160 | 160 | 160 | 8 | 13 | 54.3 | 42.6 |
| HEB 180 | 180 | 180 | 8.5 | 14 | 65.3 | 51.2 |
Available grades: ASTM A36, ASTM A572 Gr 50, ASTM A529 Gr 50, S275JR, S355 and JIS SS400.
Ground stabilization and reinforcement
Components for rock mass reinforcement, tunnel pre-support and stabilization of slopes and excavations, specified according to each project’s geotechnical design.
- Portals · tunnels · foundations
Micropiles and umbrellas
High-strength steel pipe with threads and couplers, sleeve pipes with grout valves and packers, for pre-support umbrellas, underpinning and foundations.
Request a quote - Tunnels · slopes · umbrellas
Self-drilling anchors
Threaded hollow bars (R32, R38, R51 type) with sacrificial drill bit, couplers, plates and nuts, for unstable ground or collapsing boreholes.
Request a quote - Ground support · soil nailing
Bar bolts and dowels
High-strength deformed and threaded steel bars, with plate, nut and centralizers, for grouted passive anchors and soil nailing.
Request a quote - Slopes · anchored walls · excavations
Active strand anchors
Post-tensioned anchors of low-relaxation steel strands, with anchor heads, wedges, spacers and sheaths, for active reinforcement of slopes and excavations.
Request a quote - Underground mining
Friction bolts for mining
Split set and inflatable bolts for immediate support in drifts and mine workings.
Request a quote - Crown · sidewalls · slopes
Reinforcement and protection mesh
Welded wire mesh for shotcrete, and high-strength or double-twist mesh for slope protection and stabilization.
Request a quote - Drainage · slopes · tunnels
Drainage and geosynthetics
Slotted pipe for horizontal drains, geodrains, geotextiles, geogrids and erosion control blankets.
Request a quote - Installation and grouting
Grouting and accessories
Grouts and grouting admixtures, packers, valves, centralizers, plates and nuts for installing bolts, anchors and micropiles.
Request a quote
Piles and steel casings
Steel components for deep foundations and demanding civil works, fabricated from steel plate to the diameter, wall thickness and length defined by the design.
- Bored piles · bridges
Steel casings for piles
Casings in ASTM A36 or A572 Gr 50 plate, made to measure in diameter, thickness and length.
Request a quote - Deep foundations · wharves
Steel piles
Tubular and rolled-section piles for deep foundations and retaining structures.
Request a quote
Cut and bent reinforcing steel
Reinforcing steel cut, bent and shaped to the project drawings and bar schedules, to speed up assembly of structural elements and reduce waste on site.
- Linings · structures · portals
Cutting and bending to drawings
Bar bending according to bar schedules, with dimensional accuracy and tagging by element.
Request a quote - Tunnels · hydraulic works
Reinforcement for underground works
Reinforcement cages for final linings, shafts, hydraulic structures and tie beams.
Request a quote
ASTM A709 Gr 50W structural plate
High-strength structural steel resistant to atmospheric corrosion, for bridges and road applications.
- Bridges · road structures
A709 Gr 50W plate
High-strength weathering steel for built-up girders, decks and bridge components.
Request a quote
Fibers for shotcrete
Polypropylene macro- and microfibers for concrete and shotcrete: they provide residual capacity and ductility, control cracking and increase the durability of the support.
- Tunnels · primary support
Structural polypropylene macrofiber
Structural reinforcement of shotcrete in tunnels and slopes, as an alternative or complement to welded wire mesh, dosed according to the support design.
Request a quote - Shotcrete · linings
Polypropylene microfiber
Control of plastic shrinkage cracking in concrete and shotcrete.
Request a quote
Other steel supplies
Complementary steel components for infrastructure, energy and industry.
- Bridges · industrial buildings
Large-format beams
Built-up beams for long-span structures.
Request a quote - Road infrastructure
Road barriers
Steel guardrails for road safety.
Request a quote - Camps · construction sites
Steel cabins
Steel cabins and modules for construction sites and facilities.
Request a quote - Energy · lighting
Poles and solar structures
Steel poles and mounting structures for solar plants.
Request a quote - Hydrocarbons · industry
Oil & Gas pipe
Steel line pipe for the hydrocarbons sector.
Request a quote
Does your project need something else?
The catalog is a starting point. Based on the drawings, typical section and ground conditions, our technical team identifies the complementary systems, materials and accessories your works need, validates their specification and adds them to the same supply, so you receive a complete solution consistent with the design.
Get a quote with technical advice included
Send us the typical section, drawings and quantities. We review the specification with geotechnical judgment and send you a quotation with fabrication and delivery lead times.
